Uh huh. There is Cout that is manageable -- and then there is the YC156. I
am pretty sure that anyone who has actually been-there, done-that with this
tube - would use the term "easily" in conjunction with the work needed to
make that tube and the upper bands play together.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Bill Turner
Sent: Tuesday, May 23, 2017 6:53 PM
To: Amps group
Subject: Re: [Amps] new amp race
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Tue, 23 May 2017 16:46:59 -0500, you wrote:
The second and more serious
issue is the Cout on the YC156 is massive. Getting that tube to run on
20m+
takes work. It can be done but it is a challenge even if you have serious
skills and time. Of course on 40m & below, the Cout is not a problem.
73/jeff/ac0c
REPLY:
Easily fixed with the L-network described in any recent ARRL handbook
in the amplifiers section. Requires just one small coil in the plate
lead and like magic, the Cout problem is gone.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|