It is also missing LPF (Low Pass Filter) and that is most important, You
will need a minimum of 6 filters. Additionally you will need either a 6
position wafer switch or will need to build communication path to you your
exciter for filter selection. Perhaps other hardware.
73, Bruce, W8HW
=========================
-----Original Message-----
From: Jim Monahan
Sent: Wednesday, May 31, 2017 08:26
To: amps@xxxxxxxxxxxxxx
Subject: [Amps] RF-KIT SS AMP
With all of the discussion recently about SS amps, here
is one that might be worth checking out:
http://rf-kit.de/en/2k_Kit.php
RF-KIT, a firm based in Germany, was exhibiting a legal-limit HF Amplifier
Kit at the Hamvention. The unit on display was using two LDMOS power devices
and sported a 7" color touchscreen for amplifier control and status. The kit
includes everything necessary to build the amplifier except the Raspberry Pi
3 CPU, and three fans. The company's literature states that it can be built
in less than a day.
Jim, K1PX
K1PX at msn.com
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
|