------------ ORIGINAL MESSAGE ------------(may be snipped)
On Sun, 11 Jun 2017 19:42:50 +0300, you wrote:
>So my question is: does the driver care (or even
>know) the difference between a flat 50 ohm line
>to an amplifier or one that is running at a 2:1 SWR,
>but whose length is such that the driver "sees" an
>impedance of 50+j0 Ohms.
>I say no.
>
>Vic 4X6GP
REPLY:
I say you're right. The only difference between the two scenarios
above is the one with 2:1 SWR has some additional line loss, but as
you might suspect, the driver does not "see" that.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|