Same question for the Flex 6xxx series! '
I changed my exciter from FT-5000 to Flex 6300 SDR, but can not make it
amplify. PTT and ALC lines interface fine. The VL-1000 is supposed to
have an RF sample capability to set the band and auto-tuner, but have not
been able to get that working.
73,
Bill, NE1B
On Mon, Sep 4, 2017 at 2:28 PM, dave arruzza via YCCC <yccc@contesting.com>
wrote:
> To all:
> Has anyone developed a simple "plug and play" cable combination, that is
> available commercially, so the VL-1000 operates as it does with a Yaesu
> exciter.
>
> I don't want to adjust levels or loose any functionality, just plug it in,
> turn of the rig and it works.
>
> Icom, Kenwood or Elecraft exciters.
>
> 73Dave
> W1CTN
>
>
> | | Virus-free. www.avast.com |
>
> _______________________________________________
> YCCC Reflector mailto:yccc@contesting.com
> Yankee Clipper Contest Club http://www.yccc.org
> Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|