Re: [Amps] Pole pigs removed from oil ??

["Kevin Stover, AC0H" <kstover@ac0h.net>]

I'm a little concerned about people just dumping the oil.
Transformer oil is a famous source of PCB's. How old does a pole pig 
have to be before you can safely say there are no PCB's in the oil?

On 11/2/2017 9:49 PM, Mike & Becca Krzystyniak wrote:
> Hi Jim,
>
>     I used one that came off our power lines back in the 70's when they were
> updating the grid.
>     The oil was for heat transfer.
>
>     I pulled it from the oil and let it dry out for a few months.
>     It never really drys but the weeping eventually stopped.
>
>     Mine ran a pair of 3-1000Z.  2400 VAC on the secondary.
>     It loafed along at legal limit.
>     I think I paid all of $25 for it.
>
>     Never had an issue with insulation breakdown.
>
> 73's  Mike  K9MK
>
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim Thomson
> Sent: Thursday, November 02, 2017 8:44 PM
> To: amps@contesting.com
> Subject: [Amps] Pole pigs removed from oil ??
>
> Have any of you folks used or know of anybody who has used pole
> pigs..removed from oil ?
> Is there any inherent risk  with insulation breakdown etc ?
>
> Jim   VE7RF
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--
R. Kevin Stover    AC0H
FISTS #11993
SKCC #215
NAQCC #3441
ARRL
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps