If you can find some perforated aluminum panels, that really makes a neat
looking enclosure. Just build it like Steve said. 73
Tom W7WHY
On Thu, Nov 9, 2017 at 10:58 AM, Steve Wright <stevewrightnz@gmail.com>
wrote:
> On 10/11/17 07:01, Catherine James wrote:
>
>> [...] I have no sheet-metal-working experience and I'm not interested in
>> putting in the time and effort to learn that skill.
>>
>
> If you get someone to guillotine off the aluminum panels for you, it's
> easy to just pop-rivet them to some angle section - tada! One nice box! No
> bending or cutting.
>
> All you need is an electric drill, a file, some vice-grips to hold things,
> and you are kinda done. It's really easy and fun, and with a little buff
> from a cloth with some polish and you'll be amazed at what you made..
>
> Having said that, and having begun on a 4-400 630m amp - which does end up
> being a large and complicated project, I think I'd do a little MOSFET amp.
>
>
> Steve
>
> _
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|