That works until it doesnt and then creates a nice wild plasma arc. That is
something to watch!!
Carl
----- Original Message -----
From: "Rob Atkinson" <ranchorobbo@gmail.com>
To: <amps@contesting.com>
Sent: Saturday, September 21, 2019 7:27 AM
Subject: Re: [Amps] HV Fuse
I always thought the way to make a h.v. fuse was to bolt a pair of
ceramic standoffs in a convenient location, making them around 2 or 3
inches apart, and stretch a very thin gage copper wire between them,
roughly at or slightly less then the diameter of the plate choke wire,
then run the B+ line through this. The standoffs should be taller
than the distance between them.
73
Rob
K5UJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|