[Top] [All Lists]

Re: [Amps] Amp causing RFI

Subject: Re: [Amps] Amp causing RFI
From: John Bodine <>
Date: Mon, 3 Feb 2020 21:31:49 -0500
List-post: <>
Just forget I said anything. I thought I could contribute something that
helped me and just forget it. I'll just listen from the background and
absorb all the wisdom. 73.

On Mon, Feb 3, 2020 at 3:15 PM <> wrote:

> Unfortunately a station ground does not magically absorb unwanted RF.
> I do not even have a ground rod connected to my transceiver. I am not
> sure why one amplifier would cause RFI and another one would not
> unless the output was significantly different. The output power was
> not mentioned in the original post. I would definitely use a quality
> feedline and chokes at the antenna to minimize RF current on this
> feedline.
> John KK9A
> John Bodine john.bodine at
> Drive a ground rod close to your operating position and connect to it. Your
> problems will be cured.
> _______________________________________________
> Amps mailing list


        John Bodine/WU2E
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>