Re: [Amps] Topband: PL259 type connectors for RG11

[Jim Brown <jim@audiosystemsgroup.com>]

On 4/8/2021 2:18 PM, Jim Garland wrote:
> On a related topic, I’ve stopped using LMR400 and LMR400UF coax completely for 
> HF work, using instead trusty, old-time RG-213, with its untinned copper braid.
I've used a LOT of Commscope 3227 and their PTFE plenum equivalent. It's 
loss specs are the same as LMR400, solid #10 copper center, pretty dense 
tinned copper braid over Al foil. Both solder quite well. The PTFE 
plenum coax is smaller diameter, so I build it up with heat shrink 
before mounting the 83-1SP connectors.
73, Jim K9YC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps