For any of your soldering challenges, try a little dab of Rectorseal
Nokorode plumbing flux (
https://rectorseal.com/nokorode-regular-paste-flux-group/) Lowes or HD
On Fri, Apr 9, 2021 at 2:15 PM Jim Brown <jim@audiosystemsgroup.com> wrote:
> On 4/9/2021 5:22 AM, Tim Duffy wrote:
> > I have seen other stations where guys try to solder through the body
> holes with terrible results. If you can do it - that is great.
>
> I'm a bit of a clutz mechanically. Tim's method looked solid, so I tried
> it on a few connectors, and only made a mess. I have had great success
> with conventional through the holes soldering. The secret for me is a
> big, temperature controlled iron, and a big bench vice to hold the work.
>
> 73, Jim K9YC
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
Later,
John Bodine/WU2E
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|