WOW! What an idea/
Thank you. That is treasure.
73, Ale, VK6APK
On 10/04/2021 8:29 am, RCM wrote:
And from your Harbor Freight tap and die set, Use the 7/16 x 14 die and cut the
outer jacket of RG8, 213.
Makes doing the shell a bunch easier.
On Apr 9, 2021, at 17:17, Jim Garland <4cx250b@miamioh.edu> wrote:
Hi Tim and the group,
There are many ways to skin a cat, and I applaud your technical prowess (and
patience!)in successfully assembling hundreds of PL259 connectors.
That said, many of us still struggle to install PL259s that are reliable and
trouble-free. Me especially. (I have a bag of unused outer shells from PL259 installs I
botched and had to toss.) But I've finally learned my lesson, so here are my current
criteria for the "perfect" PL259. Others will have different priorities.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|