[Top] [All Lists]

Re: [Amps] VHF1200 6m cabinet hardware?

Subject: Re: [Amps] VHF1200 6m cabinet hardware?
From: Aleksandar Petkovic <>
Date: Fri, 8 Jul 2022 08:36:35 +0800
List-post: <>
Yes. Agreed.

For us non US folks, Ebay is your easiest source of those types of screws.

I actually bought shiny stainless steel ones for my AL-1500.

I also bought a set of three 6/32 taps as I had a couple of the original screws busted off. I filed the stubs flat with the chassis and then was lucky enough to drill them out cleanly. A quick follow through with the bottoming tap and I was back in business.

73, Alek, VK6APK.

On 8/07/2022 5:25 am, gudguyham--- via Amps wrote:
Just use a simple 6x32 sae screw about 1/4 “ long with a Phillips head in black oxide. 
 Don’t bother with the Allen head it’s a PITA.

Sent from the all new AOL app for iOS

On Thursday, July 7, 2022, 4:47 PM, GD0TEP <> wrote:

Hello to the group,

I have a Command technologies VHF1200 6m amp.

The amp itself is fine, but it's and I'm not the first owner, and I know it
has seen some 'issues' over the years. Thus the covers have been off & on a
few times. As such the screws are worn and I'd like to replace them. I'm
talking about the little allan screws.  They might be made of brass (or
chocolate) as the allan holes are worn out, so they are next to useless.

Does anyone know what thread size these might be please?


Amps mailing list

Amps mailing list
Amps mailing list
<Prev in Thread] Current Thread [Next in Thread>