[Top] [All Lists]

Re: [Amps] 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 12

Subject: Re: [Amps] 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 12
From: Jim Brown <>
Date: Thu, 24 Nov 2022 18:03:39 -0800
List-post: <>
On 11/24/2022 2:35 PM, Steve Thompson wrote:
For sure the stub (looking like a short to even harmonics) works best when combined with some series inductance to work against. Hopefully the load cap is already a low impedance to harmonics so the short circuit of stub won't do so much when added across it - but it shouldn't do any harm either, and appeals to my laziness compared with having to manufacture a nice choke like you did.

Take a look at the fundamental concepts in these two links, which address the placement of stubs for harmonic suppression at HF. The first doc ran in National Contest Journal about five years ago, correcting some less than ideal work published a year earlier, the second is the slide deck for a talk I did at Visalia around the same time. My work got pretty thoroughly peer reviewed.

Some of the same techniques are used with cavity filter networks.

73, Jim K9YC

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>