Yes, me too but I just can't get my head around that piece of bent
copper strip being sufficient inductance for 6m.
I have a bigger coil in my 2m amp and my 6m amp has quite a few turns.
73 and thanks, Alek, VK6APK.
On 1/12/2022 2:55 am, jeff millar wrote:
Thank you for doing this. I find both video and your emails informative.
jeff, wa1hco
On Fri, Nov 25, 2022 at 10:50 PM jim.thom jim.thom@telus.net <
jim.thom@telus.net> wrote:
Date: Thu, 24 Nov 2022 16:59:45 -0600
From: Jim W7RY <jimw7ry@gmail.com>
To: amps@contesting.com
Subject: Re: [Amps] 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 12
<The person posting all of the links to this mystery project is not the
<same as the builder.
<Not sure why the poster is doing all of the posting?
<73, Jim W7RY
I designed the RF deck. I had to redesign the fil choke and the safety
choke...on the fly, in the middle of the night, due to the 3 hr time
difference. Scott is building it..and the mating HV supply. He doesn't have
time to post on a bunch of different sites and groups...and handle
the trolls, naysayers, general questions etc. I offered to do that for
him. He runs flat out, with no time to spare. His day starts between 4 am
and 5am. I post the short writeup, and link, to 6 x different amplifier
groups.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|