I agree it looks like there is a 50v winding it goes through and then takes off
someplace. The whole AC wiring would never pass UL listing today.
Sent from the all new AOL app for iOS
On Thursday, December 29, 2022, 12:31 AM, MU 4CX250B <4cx250b@miamioh.edu>
wrote:
Paul, I don’t understand this. The blower surely isn’t in series with
HV primary. How could that work?
73,
Jim w8zr
Sent from my iPhone
> On Dec 28, 2022, at 8:13 PM, Paul Christensen <w9ac@arrl.net> wrote:
>
>
>>
>> "If you have an old Henry, when switching to 240 without the required
>> neutral available you simply add a jumper to the terminal strip that ties
>> the primaries together to the terminal looking for the neutral. That makes
>> everything happy and is safe and legal. "
>
> That's a good solution and it's a common method used with several other amps.
> It's a bit trickier with the Alpha 70/77 series because ETO deliberately
> designed the blower in series with the HV primary. As power demand
> increases, primary HV current increases, resulting in dynamically faster
> rotational blower speed. To preserve that characteristic, I ran 4-wire
> service to the shack.
>
> Paul, W9AC
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|