I agree with Don's comments that the cost of rewinding the transformer may
exceed the cost of a new one.
I would suggest getting quotes for both a re-wind and a new transformer.
David G4FTC
________________________________
From: Amps <amps-bounces@contesting.com> on behalf of Donald Fox via Amps
<amps@contesting.com>
Sent: 18 November 2024 19:15
To: Amps Group <amps@contesting.com>
Subject: Re: [Amps] Need to have a 6KVA plate transformer rewinded
HI Luis:
You might reach out to this fellow since you are on the west coast and see if
he can help or point you in the right direction.
At one time, Magnaspec was making transformers for Henry when the ECA units
quality became unreliable.
Figure about a buck a pound to ship it both ways, so finding a local place for
you will help with costs. It may turn our that just buying a new one is close
to (or less) than the cost to ship x 2 a rewound unit.
Don N8ECH
Araceli Estrada
MAGNESPEC INC.
(310) 603-2262 xt.104
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|