Antennaware
[Top] [All Lists]

Re: [Antennaware] 160 meter 3/8 wire, steel or copper

To: OZ1AXG Flam <oz1axg.nospam@dxmail.dk>, K9AY <k9ay@k9ay.com>
Subject: Re: [Antennaware] 160 meter 3/8 wire, steel or copper
From: "Joe, aa4nn" <aa4nn@earthlink.net>
Reply-to: "Joe, aa4nn" <aa4nn@earthlink.net>
Date: Wed, 24 Sep 2008 20:42:13 -0500 (GMT-05:00)
List-post: <antennaware@contesting.com">mailto:antennaware@contesting.com>
Dr OM Flam,
Not only does the tower affect your INV L, now you have
let us know of the 80m slopers and another 160m antenna.
These wire antennas have drastically more influence on
your INV L than you ever thought the tower would have.
In the end you may get a pretty good match with low
SWR on your INV L but your radiation pattern will be
so convoluted you'll never know where your signal is
going.  hi
73, Joe, aa4nn

>Yes the distance to the tower has influenced the matching a lot ... besides 
>the 22.5 tower theres also two 80 meter sloopers and 1 inverted V 160 meter 
>dipole - altogether making the antenna electrical longer. Its a compromise 
>to get room for all the stuff up there :=) The 60 KHz difference in 
>resonanse frequence, to the calculated values, might be explained by all 
>this extra "top loading" capacity.
>

_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware

<Prev in Thread] Current Thread [Next in Thread>