CQ-Contest
[Top] [All Lists]

Wanted: Icom UX-14 interface

Subject: Wanted: Icom UX-14 interface
From: s57ad@ljutcp.hamradio.si (s57ad@ljutcp.hamradio.si)
Date: Sat Jul 1 08:22:07 1995
Thanks for reading this MSG!

Our club (S50D, former S53DCM) finally decided to spend some bucks for
buying Icom UX-14 CI-IV / CI-V interface for our IC-751 radio.
But, it seems, UX-14 is not available any more here in Europe, as
IC-751A is off-line.....

Please, inform me to my E-mail address, whether any UX-14 is available
over there in States  or in JA, (address of vendor, price, etc).

Thanks in advance for any help!

73 & GL IARU RS Championship

Mirko, S57AD
---------------------------------------------------------------------------

Snail: Mirko Sibilja, S57AD
       Savska 31
       68290 Sevnica
       Slovenia

Tel.   ++386-608-33 445  (week-ends only) 
Fax    ++386-608-41 190  Attn. Mirko Sibilja

E-mail: S57AD@ljutcp.hamradio.si
Packet: S57AD@S50BOX.svn.eu

*** Do not torture Yourself. It is MY job!   (Family Adams) ***

--------------------------------------------------------------------------


>From Rich L. Boyd" <rlboyd@CapAccess.org  Sat Jul  1 10:40:19 1995
From: Rich L. Boyd" <rlboyd@CapAccess.org (Rich L. Boyd)
Subject: Contest Station Design
Message-ID: <Pine.3.07.9507010517.E29553-9100000@cap1.capaccess.org>

On Fri, 30 Jun 1995 John-Warren@easy.com wrote:

> Rule #1 is very simple: Buy a hill.
> 
>                             John, NT5C.
> 
> 
Rule #2:  If you buy a hill build the towers a lot heavier and/or plan on
a healthy annual maintenance budget.

I'm impressed with how well stations built on flat ground work.  Hills
seem more helpful on VHF/UHF.


Rich Boyd KE3Q



>From XTFF35A@prodigy.com (MR CHARLES A CULLIAN)  Sat Jul  1 16:34:01 1995
From: XTFF35A@prodigy.com (MR CHARLES A CULLIAN) (MR CHARLES A CULLIAN)
Subject: Contest Station Design
Message-ID: <013.08188567.XTFF35A@prodigy.com>

     I can attest to the vertues of a hilltop location, but the winds 
are really bad. Each year I get a couple over 100 mph. Right now I 
have 4 beams that need repair.
     For multi-tower setups I suggest that the towers besituatedsuch 
that beams are end on when pointing to major population centers like 
Europe and Japan. Also, obviously the greater the separation, the 
better the interaction performance. 
     A word of caution, even if there is not interference, use front 
end filters because you can destroy the RF secrion of the rx even if 
the if performance eliminates audible interference (especially on 10 
M).
     Separate coax to each beam also helps because the isolation of 
some remote relays is not good enough to provide the desired 
isolation. The simplest, and possibly most effective fix for front 
end overload from another band is an open stub at the rx input. Tuned 
to a half wave at the desired listening freq, the stub will 
effectively eliminate the 2nd harmonic from the next lower band by 
providing an open quarter wave (i.e. short circuit) for that 
frequency while providing an open circuit at the listening frequency. 
This will give at least 20 db reduction, usuallyenough to eliminate 
de-sensing.
     Is this the type of info that is desired here? It is really 
pedestrian, but I remember learning it the hard wayover the years.

73 and good contesting,

Chuck, K0RF


<Prev in Thread] Current Thread [Next in Thread>
  • Wanted: Icom UX-14 interface, s57ad@ljutcp.hamradio.si <=