Guys, as you are successfully using it - can you give me an advice? I am
quite desperate already. I have WIN 98 and E-Dio SC4000 (ALS4000) SB Pro
compatible PCI soundcard - Win and DOS drivers installed.
I can start SBDVP and TR both in WIN or in MS-DOS but both ways allow me
only to play the example message under F10. I can not record. It creates an
empty file when I try to record with CTRL-F1. Maybe I have some conflict
between DOS and WIN soundcard dirvers, I don't know.
I can record sound files with Windows Sound Recorder though. Can I somehow
convert the WAV files into DVP files and record under Windows???
73
Tonno
ES5TV
----- Original Message -----
From: "Igor Sokolov" <ua9cdc@mail.ur.ru>
To: "Tadej Mezek, S51TA" <s51ta@volja.net>; <cq-contest@contesting.com>
Sent: Wednesday, April 17, 2002 11:07 AM
Subject: Re: [CQ-Contest] so2r off the shelf?
> > I am familiar with sbdvp on TR, but when you transmit the voice card is
> not
> > put out the microphone, you should build a switch with relay or so, and
> the
> > audio is not 100% ok from my experience...
>
> I am prepared to demonstrate you on the air that the audio that comes from
> SBDVP is as good or better then that coming from the mike. I have been
using
> SBDVP for the last 3-4 years and noticed that my CQ attracts more callers
if
> sent with SBDVP were the audio can be preprocessed.
>
> > even switch the mic off when transmit. And recording of messages is much
> > easier.....like k1ea dvk board.
>
> Recording with SBDVP is Ctl-F# then play it back by pressing that F#
> Just wonder what can be easier and more intuitive?
>
>
> 73, Igor UA9CDC
> >
> >
> > Ted, s51ta
> >
> >
> > Otherwise I was always TR fan....maybe something can be done by Tree.
> > ----- Original Message -----
> > From: "Pete Smith" <n4zr@contesting.com>
> > To: "Tadej Mezek, S51TA" <s51ta@volja.net>
> > Sent: Monday, April 15, 2002 11:13 PM
> > Subject: Re: [CQ-Contest] so2r off the shelf?
> >
> >
> > > At 03:37 PM 4/15/02 +0200, you wrote:
> > > >I am using TR for so2r CW and writelog for SSB, because of voice
keyer
> > > >symplicity...
> > >
> > >
> > > Ted, you might want to look at the freeware package SBDVP. It
> integrates
> > > very tightly with TR and uses a SB-16 or similar sound card. The best
> > part
> > > is that all of the keystrokes of TR of TR work just as on CW - for
> > example,
> > > when running, you type in a station's callsign, dupe with the
spacebar,
> > say
> > > his callsign and hit Enter. The program sends your exchange to him.
You
> > > type in his exchange for you and hit [Enter] again, and the program
> sends
> > > the QSL message. The only thing it won't do is voice callsigns and
> serial
> > > numbers from typed input, but that is mostly an academic advantage,
and
> > > Writelog doesn't do that anyway, does it?
> > >
> > > 73, Pete N4ZR
> > >
> > > Check out the World HF
> > > Contest Station Database at
> > > www.pvrc.org
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > CQ-Contest mailing list
> > CQ-Contest@contesting.com
> > http://lists.contesting.com/mailman/listinfo/cq-contest
> >
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
|