To: | "Jamie Dupree" <ns3t@arrl.net> |
---|---|
Subject: | [CQ-Contest] Re: Sloper Advice |
From: | it9blb@infcom.it |
Date: | Mon, 27 Sep 2004 14:12:58 GMT |
List-post: | <mailto:cq-contest@contesting.com> |
Jamie Dupree wrote:I am trying to build an 80 meter sloper for the upcoming contest season, Hi Jamie, I had a similar experience about 10 years ago: I tryied to have a sloper running from the top of a 70feet high self supporting steel tower, without (at that time) any antenna on it. Coax's braid was connected directly to the top of the tower and its central conductor to the sloper going down with a starting angle of 45 degree. After hours of experiments on lenght, position and angle of the sloper, I understood that the missing capacitive hat (yagi antenna/s) was a real MUST ! I always had a extremely high SWR and a real insensitivity to any possible change. When, after a 5el. 20m wide spacing monoband was on the top, I repeated the experiment, I was able to tune the wire in just few tens of minutes; I then setup 3 different selectable slopers at 120 degrees around the tower, with really UFB results. Just my little personal experience! Good luck, Joe, IT9BLB/KF6FBC/IU9S/IH9P http://www.ih9p.com _______________________________________________ CQ-Contest mailing list CQ-Contest@contesting.com http://lists.contesting.com/mailman/listinfo/cq-contest |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [CQ-Contest] Honda 2 kW generator , CQP, Haddon/N6ZFO |
---|---|
Next by Date: | [CQ-Contest] It is time! CQP a cometh, Ny4n |
Previous by Thread: | Re: [CQ-Contest] Honda 2 kW generator , CQP, Haddon/N6ZFO |
Next by Thread: | [CQ-Contest] (no subject), Henderson, Dan N1ND |
Indexes: | [Date] [Thread] [Top] [All Lists] |