Could someone off the m/s stations explain how the understand the rules
about the 10min timer !
Here is what I did last cqww ssb
copied from the n1mm reflector :
I was also confused by the rules before doing M/S here last CQWW SSB.
In n1mm logger the runstation (RADIO A) when starting to run on a band the
10min timer came on when logged the FIRST qso.Not if you first
did S&P mode and worked a multiplier or made a qso.
Whe used the second RADIO B only for multipliers not to make any qso.We
could switch both radios but did not.
If you make a qso( not a mult) on MULT station and the runnerstation was in
the 10min timer I ghess you are violating the rules !! NOT if you already
have pass the 10min timer.But than you have to switch radios MULT = RUNNING
and vica versa.
What is the best configuration for radio. RADIO A only running and RADIO B
only multipliers ?
if i'm not correct ,pse explain
Marc ON4MA
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|