There is a new version now on my web site that includes a setup file for
single mode entries. The 'proper' fix is to change the column numbers so
that it doesn't try to read the missing mode column. The new setup file in
the http://www.k1ttt.net/software/realtimescore_rdx.zip will take care of
that for you.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: N1MMLogger@yahoogroups.com [mailto:N1MMLogger@yahoogroups.com] On
> Behalf Of Scott Nichols
> Sent: Sunday, March 12, 2006 19:12
> To: N1MMLogger@yahoogroups.com
> Subject: Re: [N1MM] real time score reporting in rdx
>
> In N1MM, under FILE...CHOOSE WHICH CONTEST TO LOG...You have to have MIXED
> selected...The columns in the "setup_rdx" file are set to read a column
> called MODE in the runningscore.txt file, but if you are CW ONLY or SSB
> ONLY in N1MM setup, the "runningscore.txt" file (the one Realtime reads
> for info) does not contain a MODE column (column 2), therefore the
> setup_rdx, as it is, will not work, and you will get an "error reading
> file" error message...
>
> The simple solution is to setup yourself in N1MM as MIXED, and use the
> default numbers in "setup_rdx" in the "Columns in data File
> Section"...The harder solution is to setup as CW or SSB only and change
> the numbers in the "Columns in data File" boxes in setup_rdx, to
> correspond with the columns produced by N1MM in the "runningscore.txt"
> file...I dont know if changing these numbers will affect how the website
> reads the info...I have to play some more...
>
> Hope this helps...
>
> This is tough to explain, but hopefully you understand...
>
> Scott VE1OP
>
>
> ----- Original Message -----
> From: Franki ON5ZO
> To: N1MMLogger@yahoogroups.com
> Sent: Sunday, March 12, 2006 2:45 PM
> Subject: Re: [N1MM] real time score reporting in rdx
>
>
> > I was setup as CW ONLY and I had to change 'setup_rdx" accordingly,
> > so the runningscore.txt file was being read properly by Realtime...
> > Scott VE1OP
>
> Scott, I don't quite see what you changed that I didn't... Please tell
> me?
>
> - Franki ON5ZO
>
>
>
>
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
>
>
>
>
> SPONSORED LINKS Craft hobby Hobby and craft supply Ham radio
>
>
> --------------------------------------------------------------------------
> ----
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "N1MMLogger" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
> --------------------------------------------------------------------------
> ----
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/N1MMLogger/
>
> <*> To unsubscribe from this group, send an email to:
> N1MMLogger-unsubscribe@yahoogroups.com
>
> <*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|