----- Original Message -----
From: "Steve Lott" <lottsphoto@gmail.com>
To: <CQ-Contest@contesting.com>
Sent: Sunday, March 18, 2007 3:58 PM
Subject: [CQ-Contest] 419 band pass filters..... can a
heverivier duty coilbe installed ??
> while we are on this topic.......
>
> is there a method of installing beefer colils ect indide
> the unit to
> accomodate a 200 watt xcvr ???
The capacitors, especially the ones on the transmitter side
of the coil, are the limiting factor for power handling. If
you replace them with snubbers, and double or quadruple the
mumber of caps, you could stand a chance of handling 200
watts. For example, replace a 540 pf with two 270 snubbers
(paralleled) or four 540 snubbers (series/paralleled). Try
it on 10 meters. If it works on 10, it will most likely work
on the other bands, too.
Dave Hachadorian, K6LL
Yuma, AZ
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|