[Top] [All Lists]

Re: [RFI] ATT U-verse Service RFI Issues

To: "rfi@contesting.com" <rfi@contesting.com>
Subject: Re: [RFI] ATT U-verse Service RFI Issues
From: "Jim Brown" <jim@audiosystemsgroup.com>
Date: Sun, 29 Jul 2007 12:36:06 -0700
List-post: <mailto:rfi@contesting.com>
On Sun, 29 Jul 2007 14:34:27 EDT, PaulKB8N@aol.com wrote:

>He told me  that those fittings have been very problematic for not
>maintaining a good ground  connection, 


Thanks for recounting your experience. It's input like this that 
can save a lot of us a lot of trouble, and help others figure out 
what's going on in another system.

One important correction. It is not the GROUND connection that was 
problematic, it was the connection of the CABLE SHIELD. To be 
effective, shielding must be CONTINUOUS, but there is NO 
requirement for a connection to GROUND. Didja ever see a 747 
trailing a GROUND wire? :)

Your last problem (the lockup after you changed channels) appears 
to have been the result of nothing more than LEAKAGE TO the cable 
system due to that bad connection. I'll bet that the bad connection 
was also leaking trash TO your ham receiver! 

To understand why the DXE #31 clamp-ons were not effective (they 
are very good parts), study my tutorial on RFI. First study the 
first couple of chapters, then make sure you read the section on 
the Threshold Effect.



Jim Brown K9YC

RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>