CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Quads & Contesting

Subject: Re: [CQ-Contest] Quads & Contesting
From: Jan Erik Holm <sm2ekm@telia.com>
Date: Mon, 30 Jun 2008 08:25:38 +0200
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Back in the 60´ties and early 70´ties when I built some
Quad antennas I used bamboo for spreaders. Not as good
as fiberglas of course but it worked OK. I did protect
them with boat varnish, apply a few coats and they will
last quite a few years.

73 good luck Jim SM2EKM
------------------------------------
Renner, PY7RP wrote:
> Hello Guys!
> 
> 
> 
> First of all, Thanks for all the answers i have received!
> 
> Many people agreeded with the usage of cubical quads
> 
> for a short budget and some other tribanders yagis instead.
> 
> 
> 
> The reason of bamboos poles for spreaders is due
> 
> to the fact that i can not find fiberglass tubes here! Hi Hi
> 
> I think the way i have is to use some kind of resin
> or vernish with UV protection to cover the spreaders.
> 
> Thanks again and when it goes on the air i will take
> some photos and send to the list.
> 
> 73 Renner
> PY7RP
> 


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>