Joe,
After you had CC User running and feeding N1MM did you, by chance, hit
either the SH/DX button in the N1MM bandmap or type SH/DX in CCuser? Or hit
the "Get all" button in CC User? If you did any of these things, you
essentially fed an unfiltered stream through CC User and into N1MM. A
definite no-no and that would explain the N1MM bandmap populating as you
described.
It sounds like you have everything working like it should be. Just leave it
alone for a while and see how it works over time. I suspect you'll be OK.
73,
-Gary K9GS
GMDXA Web Site: www.gmdxa.org
----- Original Message -----
From: "Joe" <nss@mwt.net>
To: <cq-contest@contesting.com>
Sent: Thursday, June 10, 2010 8:22 AM
Subject: Re: [CQ-Contest] ARRL Field Day
> Yup that's the plan,
> Maybe also have CW GET or Skimmer running for the less proficient CW ops
> too.
>
> Now heres a question,, Playing with the set up here. I of course need
> to filter the spots.
>
> It was sugested to use the ve7cc program and the reverse beacon network
> for the sourse of spots and filter for N1Mm to look at.
>
> Ok, I got CC running and getting the spots from the reverse beacon
> network fine. I think I set the filters to just pass USA and Canada,
>
> And I was able to tell N1MM to get the spots for the bandmap from CC
>
> But when fired up the bandmap in N1MM is still full of DX.
>
> what do i have set wrong?
>
> Joe WB9SBD
>
> The Original Rolling Ball Clock
> Idle Tyme
> Idle-Tyme.com
> http://www.idle-tyme.com
>
> On 6/10/2010 6:28 AM, Pescatore,John wrote:
>> Hi,Joe - for hard core experienced FD ops, probably would be a good idea.
>> I like Pete's idea - if you are using N1MM, set up spotting and have the
>> Available Mult/QSO window show them by time and get them using that to do
>> high speed S&Ping across, not just within, bands.
>>
>> 73, John K3TN
>>
>> ________________________________
>> This e-mail message, including any attachments, is for the sole use of
>> the person to whom it has been sent, and may contain information that is
>> confidential or legally protected. If you are not the intended recipient
>> or have received this message in error, you are not authorized to copy,
>> distribute, or otherwise use this message or its attachments. Please
>> notify the sender immediately by return e-mail and permanently delete
>> this message and any attachments. Gartner makes no warranty that this
>> e-mail is error or virus free.
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest@contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>
>>
>>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|