Tim,
You might consider using an AUDIO Filter. It will be compatible with almost any
rig. It would not perform as well as an IF Filter, but it should be worth the
effort.
MFJ? I might even have one in my shack which I am not using.
Paul F. Gundersen, KE8NN
BSEE, CMQ/OE, CSSBB, CQE, CQA, ACS, ALB
Quality Assurance Engineer
P: 440-871-7010
C: 440-862-7949
F: 440-899-9986
--------------------------------------------
On Fri, 12/18/15, Timothy A. Holmes <taholmes160@gmail.com> wrote:
Subject: Off Topic - IC706MKIIG and Filtering
To: CQ-contest@contesting.com, "nodxa" <nodxa@lists.contesting.com>, "'William
J Squires'" <n8ws73@gmail.com>, "'Al'" <n8cx@mindspring.com>, "'Axel'"
<alpha15@live.com>, "'Bob N8BSW'" <rfaud@netlink.net>, "'Bob'"
<bndplow@hotmail.com>, "'Brian'" <bhemmis@mac.com>, "'Dale'"
<dhorn1@san.rr.com>, "'Dave M.'" <k8gvk@arrl.net>, "'Dave-K8YQL'"
<k8yql@yahoo.com>, "'Dave-WV8P'" <wv8p@roadrunner.com>, "'David'"
<42dkmetz@gmail.com>, "'Dick'" <k8ab@sbcglobal.net>, "'Don'" <w8idm@juno.com>,
"'Don Brown'" <donbrown6180@sbcglobal.net>, "'Dwaine'" <k8me@sbcglobal.net>,
"'Egon'" <ab8hy@arrl.net>, "'Frank'" <roman129@yahoo.com>, "'Franklyn'"
<franklyn.santana1@gmail.com>, "'Gary'" <GLimbert@yahoo.com>, "'George'"
<geokay123@yahoo.com>, "'Hal'" <w8pn@stratos.net>, "'Heinz'"
<hlwimmer@zoominternet.net>, "'joem'" <joe-k8yn@att.net>, "'John'"
<talleres656@att.net>, "'JohnB'" <ac8e@zoominternet.net>, "'JohnD'"
<John@DeBarr.net>, "'karl'" <wa8nvw@arrl.net>, "'kd8rb'" <kd8rb@arrl.net>,
"'Ken'" <w8kh@aol.com>, "'Kevin'" <k8vus@sbcglobal.net>, "'KI8IF'"
<ki8if_jb@ameritech.net>, "'Larry'" <kc8vzz@yahoo.com>, "'Leon'"
<leonz1@cox.net>, "'Mark K8PY'" <hackmaster_i_m@yahoo.com>, "'Mark NB8I'"
<nb8i@ymail.com>, "'Marty'" <mjcon6157@hotmail.com>, "'Metro'"
<metro351@sbcglobal.net>, "'Norm'" <w8pj@msn.com>, "'Paul'" <pgunders@att.net>,
"'Pete Rimmel'" <n8pr@bellsouth.net>, "'Richard'"
<richard.karpinski@tri-c.edu>, "'Stan'" <skorzep@cfl.rr.com>, "'Stephen'"
<n8wb@roadrunner.com>, "'Steve OLH'" <kd8olh@yahoo.com>, "'Ted'"
<xrayted10@aol.com>, "'Teodor'" <igroupaccount@gmail.com>, "'Tom'"
<ka8wli@yahoo.com>, "'Vesselin'" <vesselin_zhelezov@yahoo.com>, "'Vicki'"
<vickimate@att.net>
Date: Friday, December 18, 2015, 9:05 AM
HI Folks;
I have an IC706mkIIG that for the most part I really like,
however, it
does not have any filters of any kind in / on it. I am
planning to
replace it as soon as I can, however between now and then, I
would like
to come up with some way to filter the received
signals. The radio has
2 slots for icom filters which are very difficult to find
(at least
according to vendors at Dayton this year) (and when you do
find them
they are expensive) I was wondering if there was a way I
could tap that
signal chain at the filter slots and take the signal out to
my computer
for audio processing, and then either hear it directly from
the computer
or return it to the radio for further "voodoo" before it
gets to my ears.
I'm not very familiar with receiver functioning nor audio
processing
like this so this is kinda stretching my limits a bit here
as far as
technical stuff goes, so I might need some in depth
explainations
Thanks
TIM
W8TAH
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|