On Tue,2/23/2016 6:56 AM, Mike Loukides wrote:
I
suspect the "key clicks" aren't the result of fast rise times, but of
turning the drive to 11,
The results are additive -- rise time causes clicks, overdrive causes
clicks.
and forgetting to plug in the ALC cable on the amp.
WRONG! Using ALC between the rig and the amp is a CAUSE of clicks and
splatter. ALC between a rig and power amp should NEVER be used to set TX
power. It should ALWAYS be done by adjusting the power out from the rig!
73, Jim K9YC
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|