CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Minority Report: FT4 - Robotic Contesting

To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Minority Report: FT4 - Robotic Contesting
From: john@kk9a.com
Date: Fri, 03 May 2019 17:29:43 -0500
List-post: <mailto:cq-contest@contesting.com>
You need to show the FCC's definition of "communication" before you can make that statement.


John KK9A


Michael Clarson wv2zow wrote


An interesting thought. FT# modes produce QSOs that comply with FCC Rule
97.119 a. while typical CW or SSB QSOs do not.Quoted below.

*§97.119   Station identification.*

(a) Each amateur station, except a space station or telecommand station,
must transmit its assigned call sign on its transmitting channel at the end
of each communication, and at least every 10 minutes during a
communication, for the purpose of clearly making the source of the
transmissions from the station known to those receiving the transmissions.
No station may transmit unidentified communications or signals, or transmit
as the station call sign, any call sign not authorized to the station.

On CW, a run station, if he considers the communication the CQ, and he IDs
at least every 10 minutes, he complies with 97.119 a.

The station calling the run station typically only sends his call at the
beginning of the communication, not at the end, therefore does NOT comply
with 97.119 a. either to the letter or spirit of the rule.

FT-8 does send the station call sign at the end of the communication,
thereby complying with 97.119 a. But does it? FT8 sends a 73 after the
call. If one likens the 73 to such finishing characters like "K". "SK"
"QRT" "QRZ" etc. it still complies If not, then  A "/73" would  comply. See
97.119 c.

One last comment --unlike CW and SSB, in  RTTY contests sending one's call
at the end of a communication is pretty common practice. --Mike, WV2ZOW

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>