Please send comments to the reflector, CT-USER@mlo.dec.com
73 - Jim AD1C
To: <ct-user@contesting.com>
Msg #1313 From: K1EA Date: 20-Mar 1555Z Subj: Proposed custom contest .CFG
Bands: 160,80,40,30,20,17,15,10,6,2,135CM,70CM,33CM,23CM,9CM
Modes: CW,SSB,RTTY,SAT,NOVICE,PACKET,AMTOR
QSO: PER BAND // work the same station on multiple bands
// leave out PER BAND to allow only one qso
// regardless of band
PER MODE // work the same station on multiple modes
// leave out PER MODE to allow only one qso
// regardless of mode
MULT: PER BAND // multiplier credit of each band worked
// leave out PER BAND to allow only one mult
// regardless of band
PER MODE // multiplier credit of each mode worked
// leave out PER MODE to allow only one mult
// regardless of mode
CTY=CTY.DAT // count countries as mults.
// CTY.DAT is default country list
// CTY.DAT is the format, create your own
// using the name of your choice
// For example: CTY=IBM.DAT for the IBM DX Test
SEC=SEC.DAT // count sections, states, counties, etc
// text in the info field is used for mult
// SEC.DAT is default, and format, create your own
// For example: CTY=OHIO.DAT for the Ohio Qso Party
// This format allows aliases (see SEC.DAT)
SEC=ANY // This means that data entered in the info field
// is considered a mult without restriction
// For example, enter "PHIL" in the field and
// "PHIL" becomes a mult. Work another "PHIL"
// and it's just a q. Work a "TOM" and it's a mult
ZONE=40 // zones from 1 to number specified (40 in this case)
PX // count prefixes as mults
CALLS=CALLS.DAT // these calls are mults
// CALLS.DAT is the default and format,
// create your own
GRID // mult per 4 charater grid square, IE FN20
80=2 // 80 mtr mults count double
160=3 // 160 mtr mults count triple
40=0 // 40 mtr q's have no multiplier credit
CONT: AS=0 // q's with Asia don't count
OC=1 // q's with Oceana do count
EU=2 // q's with Europe count double pts
NA=m2 // q's with North America double the multiplier
NA=m0 // q's with North America don't count for multiplier
// if CONT is used, CT loads CTY.DAT to determine
// the country and continent from the callsign
POINTS: ALL=3 // set all to 3 base points per QSO
SSB=7 // set SSB QSO's to exactly 7 pts per
CW=x2 // (x2) multiplies base pts/q by 2 (2 x 3 = 6)
80=5 // this sets 80 mtr q's to 5, overriding ALL, SSB
// x2 on still CW works. SSB on 80 = 5 pts, CW 10 pts
40=0 // q's on 40 count for mults, not qso pts
|