Message-ID: <342844E1.1791@siol.net>
To: <ct-user@contesting.com>
Date: Wed, 24 Sep 1997 00:38:25 +0200
From: Danilo Brelih <danilo.brelih@siol.net>
Reply-To: danilo.brelih@siol.net
X-Mailer: Mozilla 3.01 (Win95; I)
MIME-Version: 1.0
To: ct-user@ve7tcp.ampr.org
Subject: DVP hum with Kenwood ?
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
Hi
Using TS950SDX with DVP (original Kenw. cable) and ProSet
headphones (HC4) by Heil.
I have really bad hum on my transmit signal using the DVP.
Some one says there is a difference between chassis ground
and microphone audio ground.?
Have I need to try lifting one of the shields/grounds.?
Which one (pin) on which end you try?
Any other ideas?
I ran lot of ground wire from the radio,computer case..
directly to ground with no luck.
Thank you fm Dan, S50U
--
__________________________________________________________________
Danilo Brelih HAM: S50U
Gorje 14A E-Mail: danilo.brelih@siol.net
5282 CERKNO : S50U@S55TCP.AMPR.ORG
SLOVENIA phone: +386 65 745 117
URL: http://lea.hamradio.si/~s50e/s50e.html
__________________________________________________________________
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://ve7tcp.ampr.org/Software/ct
Questions: owner-ct-user@contesting.com
|