CT-User
[Top] [All Lists]

[ct-user] CT 9.10/FT1000MP

To: <ct-user@contesting.com>
Subject: [ct-user] CT 9.10/FT1000MP
From: tgstewart@pepco.com (tgstewart@pepco.com)
Date: Wed, 3 Dec 1997 15:29:19 -0500
The problem is that the MP interface didnt work at all until 9.27 and didnt
work completely until the lastest version, 9.32!

AD1C can email you a copy of the latest software.  The BBS is down
permanently.  It will come back up as a web site soon.

73, Ty K3MM





ne9z@sprynet.com on 12/03/97 12:55:34 PM

Please respond to ne9z@sprynet.com

To:   ct-user@contesting.com
cc:    (bcc: Tyler G Stewart/BENN/CEC)
Subject:  [ct-user] CT 9.10/FT1000MP




Used CT 9.1 (computer 486/66, Windows 95) for the first time with FT1000MP
during CQWW-CW contest this last weekend.  The DB-9 serial interface cable
is
attached to Com 1 & the CW harness is attached to LPT 1.
I shut down out of Windows 95 & re-boot into DOS C:\ and invoke a batch
file
cqwwcw.bat.
The ct.cfg file was set up for CW mode & CQWWCW in the C:\CT\.  The batch
file,
cqwwcw.bat, which was set up in the root directory C:\ which when invoked
sequences thru:
*   The communications TSR (quick look).
*   Information sheet - which sequences thru several menus for correct
options.
          * Contest Type  * Mode  *  Category  *  etc.
*   Itemized info list.
*   Communications set-up - Comports setup as Com1, 4800, Radio 1
My problem:  When typing in the first call on 20CW into CT and hitting
enter, a
message came up at bottom of screen:  "OUT OF BAND".  Same message on all
the
other bands.  I rechecked the ct.cfg file for CW mode, Information Sheet
data &
Communication set-up.  All appeared in order for CQWW-CW contest.   I
re-looked
at the cwqqcw.bat file for mistakes and all looked OK.  Nothing I could do
would
correct the problem.  When changing bands on CT the rig would change bands
per
normal.
To continue on in the contest I re-booted to C:\CT\CT and entered the file
cqwwcw.bin which sequences thru same sequences as above except for the
Communications TSR list.
This of course disables the serial interface cable function but I had to
obviously change bands manually on the rig & CT with the normal function
buttons.  All was OK thru rest of contest.
What am I doing wrong or how do I correct the problem??
Bill  NE9Z  ne9z@sprynet.com

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com








--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com

<Prev in Thread] Current Thread [Next in Thread>