[ct-user] FT920 and CT

[Julian cleak <julian.cleak@newport.gov.uk> (Julian cleak)]

--MimeMultipartBoundary
Content-Type: text/plain
Content-Disposition: inline

Has anybody out there been successful in linking up the FT920 with CT.  There 
is no problem with the TNC but when connecting the Radio the Radio timeout 
message comes on screen, the link does however appear to work to a certain 
degree. When ALT-F1 is pressed the rig goes to the new band but with the 
display reading 0000 (14.000) but ct remains on the old band, pressing ALT-F1 
again switches the rig to the second band vfo again to the bottom of the band 
and this time CT changes to the correct band.

Has anyone else had this problem or am I doing something wrong ? I have 
selected FT920 set comtsr1 to 4800 N82 and the connector has a stright 9pin to 
9pin lead ie. 2-2 3-3 5-5.

Any ideas.

      Thanks de Julian Cleak ( GW4JBQ )   
                        julian.cleak@newport.gov.uk
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 
--MimeMultipartBoundary--

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com