CT-User
[Top] [All Lists]

[ct-user] CT 9.27 with PK-232- HELP!

To: <ct-user@contesting.com>
Subject: [ct-user] CT 9.27 with PK-232- HELP!
From: Mike Walker <mwalker@Legato.COM> (Mike Walker)
Date: Tue, 16 Mar 1999 12:08:52 -0500
Bob

Check to see if it works with a terminal program like ProComm which is a DOS 
terminal program available from http://www.hotfiles.com (part of ZDnet).

I think you will find you have a bad cable, or a com port that is sharing an 
IRQ with something else.  Try another cable or another com port.

It is likely not CT.

Mike VA3MW

At 08:39 PM 3/15/99 , Bob Zajko wrote:

>Hello.  I just joined this list, so if this was asked before, please
>forgive me.
>I have a problem getting CT 9.27 to work with a PK-232MBX TNC.  I can
>send commands to the modem and it recieves them, but nothing comes back
>on the screen in CT.  For example, if I change modes to PKT, the light
>changes, but nothing comes back on the screen.  If anyone out there has
>this TNC working with CT, please tell me your COMTSR settings for it.  I
>would appreciate any help with this problem... Thanks.
>
>73, Bob Zajko N3RU
>bobz@adelphia.net

=================================================
Mike Walker VA3MW
Corbeil Contest Club
http://www.qrz.com/wrad/directory.cgi?VA3MW

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>