Hi Ken,
Thanks to pay attention to our CAT problem with the FT-1000MP
Here are the requested informations
Computer : Pentium III 700 Mhz.
Win 98 Second edition
1- CAT light is flashing
2- I can type a frequency to QSY. It works.
3- Alt/F1 or F2 changes the band on the 1000mp.
Now the problem : when I change the band on the transceiver CT 9.48 doesn't
move.
As I can not use the packet in CT with DAMA software and a TNC 21S
I use a second PC. So when I see a station to work I change the band on the
transceiver and the logger must follow. ( as in 9.46)
I agree that it can be a pilot error , but why version 45, 46 are working
perfect
?
I don't change nothing in my configuration just swapping ct.exe 46 to the exe
file from version .48.
Ken Wolff wrote:
> George, Todd, Bernhard,
>
> We used a FT1000MP at this station (using the call K1AR) in both modes of
> ARRL. Thus, I have an "existence proof" that 9.48 can work with an MP.
>
> The next step is to get your setups working. Can you send me a little info
> about the configuration (computer, DOS version etc)? Does the CAT light
> flash? Is the radio in "mem-tune" mode? Can you type in a frequency to QSY
> the radio?
>
> Thanks - Ken
>
> -----Original Message-----
> From: owner-ct-user@contesting.com [mailto:owner-ct-user@contesting.com] On
> Behalf Of Bernard Backaert
> Sent: Thursday, March 09, 2000 5:59 PM
> To: Geovincent@aol.com
> Cc: Tod-ID; ct-user@contesting.com
> Subject: [ct-user] re CAT CT FT-1000mp
>
> Dear George and Tod,
>
> It seems that we are the only ones getting troubles with the
> communication between CT-9.48 and FT-1000mp
>
> 9.45 and 9.46 work fine
>
> Hopefully somebody can help us
>
> Thanks,
>
> Bernard ON5GQ
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.k1ea.com/
> Questions: owner-ct-user@contesting.com
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|