I spent considerable time bugging various Yaesu folks- apparently the
factory doesn't believe this is a problem worth fixing.
The front and rear keying jacks are effectively paralleled, and cannot be
separated. There is NO practical or reasonable way to use CT as an
external keyer source while using the internal keyer to operate a set of
paddles.
The only practical solution is to use an external keyer, turn off and
forget the internal MP keyer, and parallel the output of the external keyer
and CT. It IS OK to plug CT in the rear and an external keyer into the
front (or the reverse) as long as the MP keyer is turned off
This is VERY annoying, but its only annoying- the rig works fine
otherwise. Seems Yaesu factory knows better than we do what we need... (
Bill Gates brother?)
This little annoyance requires us to have enough external keyers for every
rig on a DXPedition - one more thing to carry.
73
Robin Critchell, WA6CDR / XZ0A
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|