> >I've noticed CT will key the radio when it starts, so I just press <Esc>
> >and it unkeys and normal operation can proceed. I did have some problems
> >in SS with RFI to the parallel interface, but some ferite and lower power
> >cured that.
>
>
> No, It doesn't lock up when I start ct. It locks up when I push the first
> memory button and stays that way. (This happens in the monitor mode with no
> rf being keyed so it's not an rf problem) Even when I shut down ct, the
> computer is still locked-up and keying the radio with a solid carrier. Only
> when I shut down the computer does it stop key down. Also if I shut down
> ct 9.47/9.53 and start 9.27, the carrier persists until I push a memory key
> and then 9.27 starts to key the contents of the memory.
wrong LPT interface?? There is a difference in behaviour between
versions prior to (and incl) 9.27 and following versions. Try interface
from handbook.
Waldek, DL7ANQ & SO6ANQ
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|