Al, N1API,
Concerning the com setup in CT.CFG, try spaces after the commas. In my file
I have spaces after the commas. I also specify the com port before the baud
rate.
It works on the TNC because I think the default rate is 9600.
Bill
AC0W
On Sat, 24 November 2001, Al wrote:
>
> Not contesting this weekend I'm just fooling around on the computer<s>.
>
> I've got a couple of CT Questions. First one should be easy.
>
> > Second, I wanted to "fix up" my config file and everything works
> automatically except it does not set COM2 at 4800 baud for the 1000MP.
> It selects the radio OK but not the comport and baud. Here's my config
> file:
>
> Name: Al Xxxxxx
> Call: N1API
> Address: xxx Xxxx Xxxxx XX.
> Town: Meriden,
> State: CT
> ZIP: 06451
> Zone: 5
> Contest: CQWW
> Club: Yankee Clipper Contest Club
> Mode: SSB
> Category: SO
> LAT: 41.52
> LONG: 72.82
> CWPORT: LPT1
> TNC: COM1,9600
> Radio1: FT1000MP,4800,COM2
> Radio2: NONE
> Rotor1: NONE
> Rotor2: NONE
> Network: NONE
> QSOB4: QSO B4 QRZ N1API
> AUTOSAVE:
>
>
> I thought that maybe the file is failing after the FT1000MP but I
> don't know. Com1 and the TNC do set correctly. I've tried using all
> caps for Radio1 and also adding spaces between the radio, baud and com
> and even tried to switch the order around but no luck. It's a minor
> problem because I can easily set it but it would be nice if the CFG
> file worked OK
>
> Thanks for any help.
>
> -73- Al N1API
|