Thanks Carl but.....
I think instead I will use NA! I find I don't have that
problem with NA or for that matter, WJ2O Logger.
Both of these programs communicate with the rig
on the same rig/computer connections, BOTH
DIRECTIONS!
Ken Newman - N2CQ
Woodbury, NJ 08096
N2CQ@ARRL.NET
----- Original Message -----
From: "Carl - WC4H" <wc4h@itis.net>
To: "Ken Newman" <N2CQ@arrl.net>
Sent: Sunday, February 09, 2003 11:06 AM
Subject: Re: [ct-user] Rig control problem moving from dos > win98
> Try CTWin on Windows.
>
> Carl
>
> ----- Original Message -----
> From: "Ken Newman" <N2CQ@dandy.net>
> To: "List CT-USER" <ct-user@contesting.com>
> Sent: Sunday, February 09, 2003 9:59 AM
> Subject: [ct-user] Rig control problem moving from dos > win98
>
>
> > I have been operating on a machine running DOS 6.22
> > with CT 9.50 or so with a TS850 RS232 interface.
> > As I recall, the BAND MAP pointer used to go up and
> > down the map as one turns the rig frequency knob.
> > Some months ago I went to a computer running win95
> > rev 2 and now win98 rev 2, both running rebooted
> > in DOS. The only feature that doesn't work on the two
> > is the following the rig up and down the band. You can
> > move the rig using the spot on the BANDMAP but it never
> > follows the rig when you QSY. I've upgraded to 9.77 and still the
> > same.Anyone else have that?
> >
> > Other problems on 9.85:
> > Serious problems on rig AND TNC.
> > ALT -F1 or ALT-F2 moves only two bands (40 & 15)
> > between the two but don't change band on screen.
> > No spots until TNC is powered off. Then I get only the
> > first spot.
> > Back to 9.77 for this weekend.
> > I must have missed something major on this list!
> >
> > Ken Newman - N2CQ
> > Woodbury, NJ 08096
> > N2CQ@ARRL.NET
> >
> > _______________________________________________
> > CT-User mailing list
> > CT-User@contesting.com
> > http://lists.contesting.com/mailman/listinfo/ct-user
> >
>
|