For ken to look at and others who get stuck without a radio in
arrl-vhf...
> >
> > No radio hooked up here, just trying to run a test file. Alt + F1
or
> F2
> > will not let you band switch below 903 or above 222. There is no
> place to
> > enter a frequency in the ARRL VHF contest mode...
> >
> > I operate frequently from your neighbors up the road in VT, K2LE and
> > W2AX...
> >
> >
> > John B. N8UM
>
> Just type in the frequency(full khz like 222100) in the callsign field
> and press enter, that should let you change band. It may be that ken
> didn't initialize the frequency properly when you don't have a radio.
I
> see the same problem here when I shut off the radio... I have to type
in
> 222100 to get it to log on 222, then I have to type in 432100 to get
to
> that band from either direction.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
|