CT-User
[Top] [All Lists]

[ct-user] CT 9.90.007 Tested for Field Day

To: <ct-user@contesting.com>
Subject: [ct-user] CT 9.90.007 Tested for Field Day
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Wed Jun 18 22:23:50 2003
At 09:53 PM 6/18/2003, Tim Long wrote:

>Alt-F2 works for Band-Up consistently just fine.  Alt-F1 works for Band-Down
>until you get to the 50MHz band and then it stops.  Alt-F1 does not change
>to the next lower band from any band 50MHz and below.  If you want to get to
>a band below 50MHz, you have to get there by using the Alt-F2 combination
>and wrapping from 3.4GHz to the 160M band.

Or you can just type the frequency into the callsign field, whicih will 
also change the CT band:

         28350

Then ALT-F1 will work normally (until you wrap around to 50 MHz again).

73 - Jim AD1C


-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC

<Prev in Thread] Current Thread [Next in Thread>