At 11/26/2004 11:16 AM, John WA2GO wrote:
>I'm trying to get CT (or CT-Win if CT fails) to work on my Windows 98 Laptop
>(IBM Thinkpad), and I need to know what are the COMTSR parameters I need for a
>Yaesu FT-1000MP?
>
>I tried:
>
>COMTSR1 -B4800
THe speed (4800) is set in the SETUP window when CT runs. You must specify
-8N2 for all Yaesu radios however.
>There was a time lag between the time I press Alt-F1 or Alt-F2 and the time
>the band changes, and after the first band change, I had to press the Alt-key
>twice each time to get the rig to change.
>Also, the rig does not appear to be sending frequency data to the PC. The
>starting frequency is correctly displayed in the bandmap, but then it doesn't
>change when I turn the VFO.
>
>I was running CT in a DOS Window when all of these symptoms occurred.
>
>I then tried booting to DOS by using the Boot Manager and selecting "Command
>Prompt Only" (option 5). Doing it this way, I got no radio control at all
>from CT.
>
>I am about to try CT-Win, which will be venturing into uncharted territory for
>me. But I wanted to post this right away so I could at least get an answer to
>the COMTSR settings question.
>
>Thanks!
>
>John
>WA2GO
>
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|