I don't know if you got your answer or not.
The changes that you have to make are in the port assignment. I dont' use the
NETTSRs when I network CTWin and CTDOS, I use a DOS TCP stack. If you can't
get it to work, let me know, I can research it, but I think that it has to do
with port assignments.
At 2/16/2006 04:31 PM, Mark Bailey wrote:
>Good afternoon, all:
>
>I need to add a WinCT box to our existing DOS CT network
>so that I can easily use telnet to get packet spots.
>There is a statement in the CT_additions section about
>
>"CT Win can be used in an Ethernet network with other
>computers running CT DOS and K1TTT?s nettsr. The K1TTT
>nettsr information and files are available on the CT
>web page. When networking CT DOS and CT Win computers
>with Ethernet, some changes must be made to the CT DOS
>nettsr startup command or Ethernet linking will not
>work. Using the same version of CT is advisable on
>all computers." I can't find out what this is.
>
>Do I have to do anything other than assign the Windows
>box a compatible static IP address? It will actually
>use a wireless connection for the internet connection
>and a wired connection for the network.
>
>How do I tell CT Win which network interface to use?
>
>Thanks and 73,
>
>Mark, KD4D
>
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|