Dave,
If you are running CTDos in a Windows DOS window, I would expect the
symptoms that you are reporting.
If you suspect a problem with the latest version, I know that CTWin
10.02.003 worked well with a TS-850 that I owned in 2004. The older
versions are available from http://www.k1ea.com/archives/index.htm
I can email it to you if it's not listed.
With CTWin, you just select the radio and set the baud rate in the
setup screen.
CTWin works with Win98 and newer.
John
k3ct@verizon.net
-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com] On Behalf Of Dave VO1AU
Sent: Friday, March 24, 2006 11:38 AM
To: ct-user@contesting.com
Subject: [ct-user] CTWin 10.03.002 serial port problem?
I've just downloaded the latest version of CTWin and I'm having
trouble
getting the program to recognise that my Kenwood TS-950 and TS-850
are
connected through COM1 and COM2, respectively. The program acts as
if there
are no rigs connected.
I have set up the ports with the correct speeds (4800 baud each).
My other
logging software communicates correctly with the rigs, but not this
version
of CTWin.
Is there a step I'm missing?
Dave VO1AU
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|