[Top] [All Lists]

Re: [ct-user] packet cluster

To: BRIAN MURRAY <brian.murray07@btinternet.com>,ct-user@contesting.com
Subject: Re: [ct-user] packet cluster
From: Jim Reisert AD1C <jjreisert@alum.mit.edu>
Reply-to: jjreisert@alum.mit.edu
Date: Fri, 14 Sep 2007 10:04:51 -0700 (PDT)
List-post: <mailto:ct-user@contesting.com>
--- BRIAN MURRAY <brian.murray07@btinternet.com> wrote:

>     I use ct for contesting how can i get the packet cluster to show on the
> main page.i am single opp this would be very helpful to me can anyone please
> help me 

Hi Brian,

1.  You must set up CT in the single-op assisted/unlimited or multi-op
categories.  Otherwise,  you are not allowed to see spots.

2.  ALT-A brings up the Announcement window, where incoming packet spots are

3.  You need to connect to a cluster.  If via serial port, use ALT-T to see the
packet send/receive windows.  If via Ethernet (i.e. CTWIN), you need to specify
the IP address of the cluster you want to connect to (i.e. k8smc.com).  You can
find more information on the K1EA web site (www.k1ea.com) and in the README
file that came with the version of CT you are using.  The release notes for ALL
versions are also on the K1EA web site.

73 - Jim AD1C

Jim Reisert AD1C/0, <jjreisert@alum.mit.edu>, http://www.ad1c.us
CT-User mailing list
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>