I have had this problem since day one with the Flashrom units and the 100mW
radios.... When I reboot the radio like 10 times it will hang about ever
other reboot. Or at least 2-3 times during the good old 10 reboot test.
Place orinoco cards in. Reboots just fine every time. Place 200mW microtik's
in it.. reboots everytime....
But it is something about those 100mW radios that makes it hang.
The radios might work just fine. But Im not putting it out in the field with
the 100mW radios if it is going to hang at boot up with a reboot... Not
cool. And some of my radios are over an hour away.....
And we are getting some devices to kill the power with a call to a pager. I
mean weather and electricity is enough of a headache. I dont want to deal
with a radio card that is going to cause me more grief!!
Nate
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Bill Fisher
Sent: Sunday, June 16, 2002 1:08 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Prism cards in AP-1000 & Rebooting
I having trouble having these boxes reboot with the Prism cards in them.
Be careful. Its only a 15 min drive for me. :)
Bill
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|