I have tried this on several computers, both Windows 98 SE and Windows 2000
SP2 to no avail.
Check this URL for a picture of the dialog box in question.
http://www.rockywave.net/ap/apissues.jpg
I have also tried the non-engineering version with the same issues.
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Charles Chia Sheng Wu
Sent: Wednesday, June 26, 2002 4:06 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] Can't automatically find the IP address of some
access points.
what OS are you using? certain versions of windows have been known to cause
problems...a good approach may be to try scanning from a different computer
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of John Maxwell
Sent: Wednesday, June 26, 2002 8:39 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Can't automatically find the IP address of some
access points.
I have several KarlNet TurboCell Access Points loaded into WavePoint II
access points and I am having trouble with the CONFIGEV.EVE software
forgetting the access point IP address in the "SCAN NOW" list when I go to
open the AP. It always comes up with "0.0.0.0" and won't automatically
figure it out unless I manually type it in. This could get really
confusing.
Any suggestions? Any help would be appreciated.
John Maxwell
Director of Network Operations & Deployment
RockyWave, LLC
9163 Booker Lane
Conifer, CO 80433
(303) 475-9871
fax (303) 238-6535
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|
