Silly me, needed to change the "NAT" settings to match the local IP and the
problem went away. OOPS. Nice to know that.
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of John Maxwell
Sent: Monday, October 28, 2002 7:09 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] RG-1100 Satellite DHCP/Fixed Issue
I have an RG-1100 with SOHO single software in it, v4.02 that was orignally
configured to get an IP from a DHCP (accidentally.) When I changed it to a
fixed IP, it now has two IPs the Fixed IP and the DHCP IP, it only shows the
DHCP IP in the List of Scanned Devices but won't show the Fixed IP.
Also, the DHCP address keeps changing and is basically a moving target all
day.
Any ideas as to the cause and possibly a fix?
I have two units doing this and any help would be greatly appreciated.
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|