Why don't you use the Engineering version? (configEV.exe)
-Russ
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Onder Secen
Sent: Tuesday, November 19, 2002 9:37 AM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] Bug
Do you completely loose the link or is it just a weak signal that you get?
How many satellites do you see on the Explore? I didnt see the configurator
complain when i shutdown the satellite while doing the Link Test. I went
back to Explore screen and turn on the satellite and i was able to explore
and perform the link test again for the same satellite. Any more input is
appreciated.
Thanks
Onder
----- Original Message -----
From: "Bill Fisher" <fisher@akorn.net>
To: <karlnet@WISPNotes.com>
Sent: Tuesday, November 19, 2002 12:20 AM
Subject: [Karlnet] Bug
>
> In all versions of the Configurator that I have here, the following
occurs:
>
> Wireless Link Test ---> Explore ----> Link Test
>
> Now, if you happen to lose the link (aligning antennas or whatever) you
have
> to reboot the remote because config.exe reports that there is already
> another link test going on.
>
> A much bigger deal 100 feet up on a tower on a 3750' mountain with a
laptop
> in 30MPH winds at 37 degrees F.
>
> Honestly, Karlnet is not very friendly at all when it comes to making a
link
> happen. I think NetStumbler is much more useful if you put the radios in
> 802.11 mode. And, Teletronics has a pretty good site survey tool.
>
> Bill
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|