Directed to Tony@Demarc,
Were all your 100mW cards based on the Prism 2.0? We bought some 100 mW
cards that bagged on us in the RG's, but I thought they were 2.5...
Which of your cards are 2.5?
Travis
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of John Benson
Sent: Friday, December 13, 2002 3:17 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] prisim radios for AP-1000's
They don't work very long. I tried one, and it worked for about half of
a day, and then shut down. The RG could not handle the power draw.
That was using the prism 2.0 100mw cards.
John Benson
Wireless Systems Engineer
801-427-0719
Wnoc
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of George Minich
Sent: Friday, December 13, 2002 7:16 AM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] prisim radios for AP-1000's
How well do the 100mW work in the RG-1100's? Which brand and model of
the cards are people using with success?
Thanks
George
----- Original Message -----
From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
To: <karlnet@WISPNotes.com>
Sent: Friday, December 13, 2002 3:35 AM
Subject: RE: [Karlnet] prisim radios for AP-1000's
> Bob
>
> We have many people using the 100mW cards with very good success
> running TurboCell on the AP-1000. Disclaimer, this solutions is not
> supported directly by Orinoco, Karlnet or Demarc. The only is the
> noise level reading are not accurate, but version 4.31 seems to have
> changed something should know more about this is a few days.
>
> Sincerely
> Tony Morella
> Demarc Technology Group
> Office: 908-996-7995
> Cell: 908-246-9170
> Fax: 908-847-0202
> email: tony@demarctech.com
> http://www.demarctech.com
> Open Chat Server http://www.demarctech.com:8000
> Yahoo IM: tonymorella
> Wireless Solution Provider
>
>
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of Bob Hrbek
> > Sent: Wednesday, December 11, 2002 6:07 PM
> > To: karlnet@WISPNotes.com
> > Subject: [Karlnet] prisim radios for AP-1000's
> >
> >
> > What is working best with AP-1000's and Karlnet 4.x?
> >
> > I want to get rid of some of my amps to lower noise. What
> > will the trade
> > off be if I replace my ORiNOCO radios and Amps with just a high
> > power Prisim card?
> >
> > Thanks,
> > bob
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|